The EM Singleshot survey system is an inclinometer for use in vertical well-drilling. The surface system provides quick and concise reporting of well inclination on a large, color LCD display, and a printer provides convenient printouts of the well data.

There is no timer to set. Just plug the tool into the surface system to power it on and you’re ready to go.

Unplug the tool and send it down the well. Once the tool reaches the bottom, the surface system records the current time with the press of a button. Then the tool can be retrieved.

When the tool returns to the surface, just plug it in. The surface system displays the well inclination. You can then print a report.

• Take Survey screen

   

  http://www.erdosmiller.com/wp-content/uploads/2012/03/TakeSurvey.bmp

  From this menu, you can begin the survey, print the last survey, or use Test Mode, which displays the inclination of the device live.

• Run Tool Downhole screen

   

  http://www.erdosmiller.com/wp-content/uploads/2012/03/RunToolDownhole.bmp

  After you've run the tool down-hole, press the "On Bottom" button to proceed.

• Retrieve Tool screen

   

  http://www.erdosmiller.com/wp-content/uploads/2012/03/RetrieveTool.bmp

  After the survey is finished, the surface system waits for the tool to be retrieved.

• Results screen

   

  http://www.erdosmiller.com/wp-content/uploads/2012/03/Results.bmp

  Once you plug the tool into the surface system, the results of the survey are displayed.

• Restart screen

   

  http://www.erdosmiller.com/wp-content/uploads/2012/03/Restart.bmp

  To ensure that the clocks on the tool and the surface system match, you may need to reset the tool by unplugging it and plugging it back in.

• Preparing Tool screen

   

  http://www.erdosmiller.com/wp-content/uploads/2012/03/PreparingTool.bmp

  The surface system configures the tool, which takes about 20 seconds.

• Please Wait screen

   

  http://www.erdosmiller.com/wp-content/uploads/2012/03/PleaseWait.bmp

  While this screen is shown, the tool is performing the survey.

• Low Battery screen

   

  http://www.erdosmiller.com/wp-content/uploads/2012/03/LowBattery.bmp

  The surface system will inform you when the battery in the tool needs to be replaced.

• Live Inclination screen

   

  http://www.erdosmiller.com/wp-content/uploads/2012/03/LiveInclination.bmp

  Using Test Mode, you can see the live inclination of the survey tool.

• Error screen

   

  http://www.erdosmiller.com/wp-content/uploads/2012/03/Error.bmp

  The surface system displays this screen when the connection between it and the tool is bad.

• Connect Single Shot screen

   

  http://www.erdosmiller.com/wp-content/uploads/2012/03/ConnectSingleShot.bmp

  Before you can use the singleshot, you must connect the tool to the surface system.

Specifications:

• Typical battery life of 1000 hours
• Real-time display of inclination on the surface
• High-accuracy digital 3-axis MEMS accelerometers
• Operating temperature: -10 to 125C
• Maximum shock: 20,000g
• Maximum pressure: 10,000psi
• Inclination measurement accuracy of ±0.1˚
• Triaxial accelerometers
• Power supply box: 85-264 VAC/120-375 VDC
• Diameter: 1.75″